1 1

Uniview

IN9800-A12-IN

IN9800-A12-IN

$0.00 USD
$0.00 USD
Sale Sold out
Shipping calculated at checkout.
CLICK HERE > "IF YOU FIND A BETTER PRICE?"
No reviews

Specification (excerpt)

  IN9800-A12-IN
Hardware Specification
MPU Slots 2*Half-width slot
SFU Slots 2
Module Slots 10
Switching capacity 9.6Tbps
Forwarding performance 5713.92Mpps
Fan Slots 2
Cooling Fans 12
Air Inlet and outlet direction Left and right ventilation
Power Slots 4,
1 to 3 service boards, recommend 2 power supply;
4 to 8 service boards, recommend 3 power supply;
9 to 10 service boards, recommend 4 power supply.
Power Supply 110V AC to 240V AC, 50/60Hz
Max.Power 650W
Dimensions (W×D×H) 442x480x703mm, 16U
Operating Temperature 0℃ to 45℃
Operating Humidity 5% to 95%, non-condensing
MTBF >200000h
Weight Empty Frame: ≤49.1kg
Fully Loaded: ≤150kg
Software Specification
Layer-2 VLAN, STP, RSTP, MSTP, QinQ, flexible QinQ, VLAN Mapping, full duplex traffic control, back pressure traffic control, link aggregation (support 128 aggregation groups, with each group consisting of 8 members), cross-board link aggregation, cross-board port/flow mirroring, port broadcast/multicast/unknown unicast forwarding storm suppression, Jumbo Frame, VLAN division based on port/protocol/subnet and MAC, PVLAN, GVRP, CoS priority, etc.
Layer-3 IPv4: Static routing, RIP v1/2, OSPF, ISIS, BGP, policy-go-together, etc.
IPv6: IPv6 static routing, RIPng, OSPFv3, ISISv6, BGP4+, transition tunnel technology from IPv4 to IPv6, etc.
Data Center Support 802.1Qbg and DCB
Support mainstream Overlay standards such as VXLAN
Support Openflow1.3 protocol
Virtualization Support VSM (Virtual Switching Matrix) N:1 virtualization technology, which performs virtualization of multiple L2 ~ 7 physical devices into a single L2 ~7 logical device.
Support service chain technology, which defines business streams based on L2-7 protocol features, and allows on-demand assignment of physical/logical service modules for traffic passage.
Support IP-based unified management between the host and service modules and unified configuration interface
Reliability Support master control board 1+1 redundancy
Support power N+1 redundancy
Passive backplane design; all boards support hot-plug
Support online status monitoring protocol to perform detection of key components including master control engine, backplane, chip and storage
Multicast Support IGMPv1/v2/v3, IGMPv1/v2/v3 Snooping, PIM-SM/PIM-DM/PIM-SSM
ACL Support ACL rules including source IP, source port, destination IP, destination port, protocol number, physical port
Maintenance Support FTP, TFTP, X-modem
Support Web management port, SNMP v1/v2/v3
Support RMON, NTP clock, intelligent power management
View full details